Machines

 
  • Billet shear BRET 1000t

    Knüppelschere BRET 1000t

    Used billet shears BRET 1000t in good working condition. The scissors are designed for material up to 170 x 170mm (square) and 190mm (round).

  • Billet Shear ERFURT ScK 1600

    Knüppelschere ERFURT ScK 1600

    Used billet shear ERFURT ScK 1600 for cutting round (max. 235mm) or square (max. 220mm) material. The machine is equipped with a separation table for the input material and a 6000mm long roller table. The material sections can be between 100 and 1000mm long. The billet shear ERFURT ScK 1600 is still installed and can be demonstrated under power.

  • Billet shear ERFURT ScPK 800 I

    Knüppelschere ERFURT ScPK 800 I

    Used billet shear ScPK 800 I for shearing solid material in various grades up to 160mm (transverse) and 170mm (round) as well as various dimensions for flat material. Incl. separation table and feed roller table.

  • Billet shear PEDDINGHAUS CADAX 500

    Knüppelschere PEDDINGHAUS CADAX 500

    Used billet shears PEDDINGHAUS CADAX 500 with separation, 8m roller table and weighing device (Fa. Mettler). Shear performance: 450N/mm = 125/115mm; 550N/mm = 115/105mm; 650N/mm = 105/95mm The PEDDINGHAUS CADAX 500 is still installed and powered.

  • Automatic circular saw KALTENBACH RKS 451 NA

    Kreissägeautomat KALTENBACH RKS 451 NA

    Used automatic circular saw KALTENBACH RKS 451 NA incl. roller table (replenishment machine). Saw blade diameter: 450 mm Cutting diameter: 150 mm Cutting range at 90 degrees: around 150 mm Cutting area at 90 degrees: square 140x140 mm Cutting area at 90 degrees: flat 260x30 mm Saw blade feed speed 0-1100 mm/min Cutting width: max.5 mm Saw blade bore: 50 mm -hydraulic saw blade feed / cutting height, depending on the material size / under-table setting of the saw blade / engine load indicator / machine protective hood / hydraulic unit / cooling water device with coolant pump / section gripper ABS / chip conveyor (ejection height = 930mm)

  • Progressive die press 350t - 1200t

    Mehrstufenpresse 350t - 1200t

    New Progressive die press ISGEC 350t - 1200t, individually tailored to your needs with attractive conditions, excellent quality and manageable delivery times. Tell us what you need and we will make a corresponding offer.

  • Plate grinder DANOBAT RT 2500

    Plattenschleifmaschine DANOBAT RT 2500

    Used plate grinder with table size 2500 x 560mm and Sinumerik conrol. The grinder has been serviced regularly and is still under power. It is in a very good condition.

  • Pneumatic hammer HUTA ZYGMUNT MPM 3.150 C

    Pneumatischer Hammer HUTA ZYGMUNT MPM 3.150 C

    Used pneumatic drop forging hammer HUTA ZYGMUNT MPM 3.150 C. The hammer is in good condition and has already been dismantled. There are two used rams and brand-new and unused bulkhead inserts for the hammer.

  • Try out press 300t - 2500t

    Probierpresse 300t - 2500t

    New Try out press ISGEC 300t - 2500t, individually tailored to your needs with attractive conditions, excellent quality and manageable delivery times. Tell us what you need and we will make a corresponding offer.

  • Saw- drilling center PEDDINGHAUS

    Säge- Bohranlage PEDDINGHAUS

    1.) Band saw PEDDINGHAUS MEBA 1020 DGR (built in 2005) 2.) Drilling machine PEDDINGHAUS BDL 1000/9 (built in 2007) 3.) Blasting machine AGTOS RT 15 (built in 2011) 4.) Painting unit INTEC 1.5 (built in 1998) 5.) Drying tunnel INTEC (built 1998) *** Performance data and video on request ***

Separation of bars
Separation of bars
Cutting of bars
Cutting of bars
Heating of billets
Heating of billets
Forged raw parts
Forged raw parts
Finish machined forging parts
Finish machined forging parts
Shipping of forged parts
Shipping of forged parts
 
 
Separation of bars
1
Cutting of bars
2
Heating of billets
3
Forged raw parts
4
Finish machined forging parts
5
Shipping of forged parts
6

We are looking for

  • Trimming presses 300t – 800t
  • Forging presses 1000t – 4000t 
  • BANNING GOA 6300
  • Counter-blow hammer 32mt
  • Manipulators 2000kg – 5000kg
  • LASCO hydraulic press 1500t
  • Bandsaws/ Circular saws
  • CNC-Machining centers