Machines

 
  • Plate grinder DANOBAT RT 2500

    Plattenschleifmaschine DANOBAT RT 2500

    Used plate grinder with table size 2500 x 560mm and Sinumerik conrol. The grinder has been serviced regularly and is still under power. It is in a very good condition.

  • Pneumatic hammer HUTA ZYGMUNT MPM 3.150 C

    Pneumatischer Hammer HUTA ZYGMUNT MPM 3.150 C

    Used pneumatic drop forging hammer HUTA ZYGMUNT MPM 3.150 C. The hammer is in good condition and has already been dismantled. There are two used rams and brand-new and unused bulkhead inserts for the hammer.

  • Forging hammer HUTA ZYGMUNT MPM 1000 A

    Pneumatischer Hammer HUTA ZYGMUNT MPM 1000 A

    Used forging hammer HUTA ZYGMUNT MPM 1000 A. The hammer is still installed on site but no longer under power. The mechanical condition is very good.

  • Try out press 300t - 2500t

    Probierpresse 300t - 2500t

    New Try out press ISGEC 300t - 2500t, individually tailored to your needs with attractive conditions, excellent quality and manageable delivery times. Tell us what you need and we will make a corresponding offer.

  • Saw- drilling center PEDDINGHAUS

    Säge- Bohranlage PEDDINGHAUS

    1.) Band saw PEDDINGHAUS MEBA 1020 DGR (built in 2005) 2.) Drilling machine PEDDINGHAUS BDL 1000/9 (built in 2007) 3.) Blasting machine AGTOS RT 15 (built in 2011) 4.) Painting unit INTEC 1.5 (built in 1998) 5.) Drying tunnel INTEC (built 1998) *** Performance data and video on request ***

  • Forging manipulator DANGO & DIENENTHAL DDS 300

    Schmiedemanipulator DANGO & DIENENTHAL DDS 300

    Used forging manipulator DANGO & DIENENTHAL DDS 300 in working condition. The manipulator has a nominal load capacity of 300kg with a block length of 4 meters. The load torque is 600mkg. Inclination of the clamps 30.5 °, stroke 500mm. The pliers were modified by the previous owner.

  • Forging manipualtor RUTHNER 10t

    Schmiedemanipulator RUTHNER 10t

    Used forging manipulator RUTHNER 10t with cable drum. The manipulator is in good condition and still under power. The electrical system was renewed in 2012 and is up to date.

  • High-speed saw TRENNJAEGER UNITRENN 520 HA

    Schnelltrennsäge TRENNJAEGER UNITRENN 520 HA

    Used quick-cut saw TRENNJAEGER UNITRENN 520 HA with only a few hours of operation. Cutting area: Max. 110 x 110 x 9 mm / 200 x 90 mm single cuts (cutting time 3 - 5/6 - 8 seconds) Max. 70 x 70 mm x 6 mm / 100 x 50 mm series cuts (cutting time 3 - 5/6 - 8 seconds) Proma - saw blades, full steel blade with a diameter of 520 mm and 560 mm with 300 teeth. Cutting speed 3,600 rpm. Height adjustment with cover and protective screen. Manual miter setting with scale. Also available as an option: 1 x Exact-Stop PD 200 measuring stop (measuring length 9000 mm, total length 9,500 mm) electronically with memory and digital display but without runways. Suitable for sawing profiles.

  • Servo press 300t - 4000t

    Servopresse 300t - 4000t

    New Servo press ISGEC 300t - 4000t, individually tailored to your needs with attractive conditions, excellent quality and manageable delivery times. Tell us what you need and we will make a corresponding offer.

  • Tandem press line 300t - 2500t

    Tandempresslinie 300t - 2500t

    New Tandem press line ISGEC 300t - 2500t, individually tailored to your needs with attractive conditions, excellent quality and manageable delivery times. Tell us what you need and we will make a corresponding offer.

Separation of bars
Separation of bars
Cutting of bars
Cutting of bars
Heating of billets
Heating of billets
Forged raw parts
Forged raw parts
Finish machined forging parts
Finish machined forging parts
Shipping of forged parts
Shipping of forged parts
 
 
Separation of bars
1
Cutting of bars
2
Heating of billets
3
Forged raw parts
4
Finish machined forging parts
5
Shipping of forged parts
6

We are looking for

  • Trimming presses 300t – 800t
  • Forging presses 1000t – 4000t 
  • BANNING GOA 6300
  • Counter-blow hammer 32mt
  • Manipulators 2000kg – 5000kg
  • LASCO hydraulic press 1500t
  • Bandsaws/ Circular saws
  • CNC-Machining centers