Used automatic band saw WAGNER WPB 340 A with 4m roller table and one-axis control. Cutting range up to 340mm, cutting speed continuously 18 - 114m / min. Saw band 5270 x 32 x 1.1mm. Workpiece gripper for automatic operation. The saw is still set up and under power and is in good condition.
Used automatic band saw KALTENBACH KBR 370 NA in very good functional condition. Automatic material feed, hydraulic material clamping, cutting speed stepless. Cutting area around 370 mm, cutting area square 400x370 mm, saw band dimensions 5920x41x1.3 mm, cut-off lengths single stroke 10-760 mm.
Second hand oil-hydraulic LASCO VPA 160 preforming press (multi-purpose press). Two identical presses available !
Second hand machining center GROB G 320 with two spindles. X-axis 600mm, Y-axis 655mm, Z-axis 685mm. Spindle type HSK-63 with 12,000 rpm. Distance of the spindles 700mm. Table size 1450 x 800mm with 1070kg load. Electrics: SIEMENS 840D
New Blanking line ISGEC 300t - 1500t, individually tailored to your needs with attractive conditions, excellent quality and manageable delivery times. Tell us what you need and we will make a corresponding offer.
Used C-frame press EDELHOFF AZR 100. The press is in working condition and can be viewed under power.
Used C-frame press MÜLLER 25t. The press is under power and can be visited.
Used CNC bed milling machine MTE BF 2200. Travel X = 2000, Y = 1000, Z = 1000. Automatic swivel head 4000 rpm, rapid traverse 15.000mm / min, feed force 25.000N. The bed milling machine has been regularly maintained and is still available under power. It is in a very good condition. The swivel head was completely overhauled in 2017 by MTE.
Used BLISS 2750t open-die forging press with sliding table for 3 dies. The press was built in 1996 and completely overhauled in 2016 and equipped with powerful OILGEAR-TOWLER pumps and a new control system. Nominal pressing force: 2,500 tonnes Maximum pressing force: 2,750 tonnes Pressing speed: 56 mm/s at 2,000 tonnes Pressing speed: 45 mm/s at 2,500 tonnes Number of strokes/min in the levelling cycle at 400 t: 72 strokes/min. Ram stroke: 1,525 mm Clearance between the columns: 1,850 mm Maximum opening without removing the mould holder: 2,800 mm Ejector in the lower table: stroke of 610 mm and force of 170 tonnes Lower table with cylinder displacement: Space for 3 moulds The positioning of the ram as well as the force and speed are regulated by a programmable control system. A microcomputer is used to create and save programmes at the workstation.
Used WAGNER 1200t (The press was upgraded to 1200 tonnes by OILGEAR) open-die forging press with sliding table. The press was overhauled and modernised in 2006 and 2019. Diameter of main cylinder: 710 mm Diameter of the retraction cylinders: 225 mm Working pressure at 1000 t pressing force: 250 bar Retraction force: 200 tonnes Pump capacity: 3 x 225 kW Total useful flow: 1500 litres/min, 3 x 500 litres Working speed: 4 to 80 mm/ s (±5%) Retraction speed: 150 mm/ s (possible up to 200 mm/s) Forging force = work: from 0 t (±5 bar) to l000 t (±10 bar) Precision when stopping: ± 1.5 mm
sotec GmbH
Gewerbestr. 14
77694 Kehl
Germany
+49.(0)7851. 955 800
+49.(0)7851. 955 801
+49.(0)160. 975 202 02
info@sotec4u.com
www.sotec4u.com
© sotec GmbH