Used machining center DECKEL MAHO DMC 64V linear. The machine is still set up and under power. The spindle was changed in 2013, after which the system was only used sporadically. The delivery is accordingly very good, the machine has only 8,000 operating hours. Control Heidenhain iTNC 530 Travel paths: X = 640 mm, Y = 600 mm, Z = 500 mm, speed range 1 - 12,000 min-1, Tool holder HSK-A 63, tool magazine 30, Max. Tool weight 7kg, max. Tool length 300mm, max. Tool diameter 100mm.
© sotec GmbH