Machine tools

 
  • Machining center GROB G 320

    Bearbeitungsmaschine GROB G 320

    Second hand machining center GROB G 320 with two spindles. X-axis 600mm, Y-axis 655mm, Z-axis 685mm. Spindle type HSK-63 with 12,000 rpm. Distance of the spindles 700mm. Table size 1450 x 800mm with 1070kg load. Electrics: SIEMENS 840D

  • CNC lathe GILDEMEISTER CTX 420 linear

    CNC-Drehautomat GILDEMEISTER CTX 420 linear

    Used CNC lathe GILDEMEISTER CTX 420 linear. The machine is still set up and occupied by the end of January 2020 with orders. A bar loader of the brand KUPA is included, but currently with a fault message. Accessories: Three-jaw chuck for main and counter spindles, coolant system, suction, VDI-40 holder, Paper band filter. X-axis: 260mm, Y-axis: 635mm ... further data on request

  • CNC Bed Milling Machine MTE "Kompakt"

    CNC Bettfräsmaschine MTE "Kompakt"

    Used CNC bed milling machine with Heidenhain control. Working area 2000 x 800 x 800mm. The bed milling machine has been regularly maintained and is still available under power. It is in a very good condition.

  • CNC bed milling machine MTE BF 2200

    CNC Bettfräsmaschine MTE BF 2200

    Used CNC bed milling machine MTE BF 2200 with Siemens control. Travel X = 2000, Y = 1000, Z = 1000. Automatic swivel head 4000 rpm, rapid traverse 15.000mm / min, feed force 25.000N. The bed milling machine has been regularly maintained and is still available under power. It is in a very good condition.

  • Twin-spindle chuck lathe WEISSER Univertor AC-2

    Doppelspindeldrehmaschine WEISSER Univertor AC-2

    Used double spindle lathe WEISSER Univertor AC-2. The lathe is in good condition and has a loading and unloading system. Diameter of front spindle bearing: 90 mm Lining size: 210 mm Working stroke of the X-axis: 260 mm Travel Z-axis: 180 mm Rapid traverse X-axis: 60 m / min Rapid traverse Z-axis: 30 m / min

  • GGTRONIC GD-M 2000 turning, drilling and milling center (16.000mm)

    GGTRONIC GD-M 2000 Dreh-, Bohr- und Fräszentrum (16.000mm)

    (Little) used turning, drilling and milling center of GGTRONIC with a length of 16,000mm between the jigs. Suitable for diameters up to 2500mm and 60t piece weight. Turning capacity 100 kW, center diameter (155 mm), longitudinal direction (z-axis) 16,700 mm, speed feed 1-12,000 mm / min Transverse (x-axis) turning and deep drilling X-axis stroke 1,550 mm Max. Drilling diameter 400 mm Speed ​​feed 1-6,000 mm / min. Working hours: On-time incl. standby: 4800h Spindle rotation: 1680h Milling spindle turn: 400h

  • Plate grinder DANOBAT RT 2500

    Plattenschleifmaschine DANOBAT RT 2500

    Used plate grinder with table size 2500 x 560mm and Sinumerik conrol. The grinder has been serviced regularly and is still under power. It is in a very good condition.

Separation of bars
Separation of bars
Cutting of bars
Cutting of bars
Heating of billets
Heating of billets
Forged raw parts
Forged raw parts
Finish machined forging parts
Finish machined forging parts
Shipping of forged parts
Shipping of forged parts
 
 
Separation of bars
1
Cutting of bars
2
Heating of billets
3
Forged raw parts
4
Finish machined forging parts
5
Shipping of forged parts
6

We are looking for

  • Trimming presses 300t – 800t
  • Forging presses 1000t – 4000t 
  • BANNING GOA 6300
  • Counter-blow hammer 32mt
  • Manipulators 2000kg – 5000kg
  • LASCO hydraulic press 1500t
  • Bandsaws/ Circular saws
  • CNC-Machining centers