New machines

 
  • Outrigger pads for cranes (NEW)

    Kranabstützplatten (NEU)

    Outrigger pads - Firm stand for cranes in all terrains. With the documentation and load case analysis for the outrigger pads, you are always on the safe side. We are offering outrigger pads from 35 tons up to 250 tons in different sizes and with different lifting points. Delivery at short notice. All outrigger pads are calculated with FEM, so special cases up to the limit can be simulated. Special sizes of the outrigger pads on request. The production plant for the outrigger pads is approved according to DIN EN 1090-2 EXC.4, DIN EN ISO 9001 & DIN EN ISO 3834-2. You can find the standard dimensions of the pads in below pictures. Please let us know the requested size so that we can send you our quotation.

  • Key driver KR 100

    Keilramme KR 100

    Brand new key driver to insert and extract the wedges between forging hammer and tool holder. Key driver of 1000Nm capacity incl. adaptor for fork lifts. Maximum wedge dimensions: 60 x 80 x 500mm

  • Key driver KR 200

    Keilramme KR 200

    Brand-new key driver to insert and extract the wedges between forging hammer and tool holder. Key driver with a capacity of 2000Nm incl. adaptor for fork lifts. Max. wedge dimensions: 80 x 120 x 1000mm

  • Key driver KR 400

    Keilramme KR 400

    Brand-new key driver to insert and extract the wedges between forging hammer and tool holder. Key driver with a capacity of 4000Nm incl. adaptor for fork lifts. Max. wedge dimensions: 100 x 200 x 2000mm

  • Key driver KR 800

    Keilramme KR 800

    Brand-new key driver to insert and extract the wedges between forging hammer and tool holder. Key driver with a capacity of 8000Nm incl. adaptor for fork lifts. Max. wedge dimensions: all existing sizes

Separation of bars
Separation of bars
Cutting of bars
Cutting of bars
Heating of billets
Heating of billets
Forged raw parts
Forged raw parts
Finish machined forging parts
Finish machined forging parts
Shipping of forged parts
Shipping of forged parts
 
 
Separation of bars
1
Cutting of bars
2
Heating of billets
3
Forged raw parts
4
Finish machined forging parts
5
Shipping of forged parts
6

We are looking for

  • Eccentric press 250t – 315t
  • Forging press 500t
  • Forging press 1600t – 2500t
  • Open die forging press 1000t – 1500t
  • Forging manipulator 3000kg – 5000kg
  • Charging manipulator 6000kg – 8000kg
  • Bandsaws/ Circular saws
  • Knuckle-joint press 2500t