Used automatic circular saw KALTENBACH RKS 451 NA incl. roller table (replenishment machine). Saw blade diameter: 450 mm Cutting diameter: 150 mm Cutting range at 90 degrees: around 150 mm Cutting area at 90 degrees: square 140x140 mm Cutting area at 90 degrees: flat 260x30 mm Saw blade feed speed 0-1100 mm/min Cutting width: max.5 mm Saw blade bore: 50 mm -hydraulic saw blade feed / cutting height, depending on the material size / under-table setting of the saw blade / engine load indicator / machine protective hood / hydraulic unit / cooling water device with coolant pump / section gripper ABS / chip conveyor (ejection height = 930mm)
Used billet shears PEDDINGHAUS CADAX 500 with separation, 8m roller table and weighing device (Fa. Mettler). Shear performance: 450N/mm = 125/115mm; 550N/mm = 115/105mm; 650N/mm = 105/95mm The PEDDINGHAUS CADAX 500 is still installed and powered.
Used hydraulic press CLEARING H-3000 with die cushion (900t) and ejector (90t). The press has a Télemécanique control but is no longer connected.
sotec GmbH
Gewerbestr. 14
77694 Kehl
Germany
+49.(0)7851. 955 800
+49.(0)7851. 955 801
+49.(0)160. 975 202 02
info@sotec4u.com
www.sotec4u.com