Open-die forging press BLISS 2750t

Technical data

hydraulic

Used BLISS 2750t open-die forging press with sliding table for 3 dies. The press was built in 1996 and completely overhauled in 2016 and equipped with powerful OILGEAR-TOWLER pumps and a new control system. Nominal pressing force: 2,500 tonnes Maximum pressing force: 2,750 tonnes Pressing speed: 56 mm/s at 2,000 tonnes Pressing speed: 45 mm/s at 2,500 tonnes Number of strokes/min in the levelling cycle at 400 t: 72 strokes/min. Ram stroke: 1,525 mm Clearance between the columns: 1,850 mm Maximum opening without removing the mould holder: 2,800 mm Ejector in the lower table: stroke of 610 mm and force of 170 tonnes Lower table with cylinder displacement: Space for 3 moulds The positioning of the ram as well as the force and speed are regulated by a programmable control system. A microcomputer is used to create and save programmes at the workstation.