Used forging manipulator DANGO & DIENENTHAL 300kg in working condition. The manipulator has a nominal load capacity of 300kg with a block length of 4 meters. The load torque is 600mkg. Inclination of the clamps 30.5 °, stroke 500mm. The pliers were modified by the previous owner.
Used quick-cut saw TRENNJAEGER UNITRENN 520 HA with only a few hours of operation. Cutting area: Max. 110 x 110 x 9 mm / 200 x 90 mm single cuts (cutting time 3 - 5/6 - 8 seconds) Max. 70 x 70 mm x 6 mm / 100 x 50 mm series cuts (cutting time 3 - 5/6 - 8 seconds) Proma - saw blades, full steel blade with a diameter of 520 mm and 560 mm with 300 teeth. Cutting speed 3,600 rpm. Height adjustment with cover and protective screen. Manual miter setting with scale. Also available as an option: 1 x Exact-Stop PD 200 measuring stop (measuring length 9000 mm, total length 9,500 mm) electronically with memory and digital display but without runways. Suitable for sawing profiles.
New Servo press ISGEC 300t - 4000t, individually tailored to your needs with attractive conditions, excellent quality and manageable delivery times. Tell us what you need and we will make a corresponding offer.
New Tandem press line ISGEC 300t - 2500t, individually tailored to your needs with attractive conditions, excellent quality and manageable delivery times. Tell us what you need and we will make a corresponding offer.
Parts cleaning system WÄCHTER DU 3000 for parts 200 x 150mm with a maximum of 30kg. The system was installed and put into operation but not used.
New Transfer press line ISGEC 300t - 3500t, individually tailored to your needs with attractive conditions, excellent quality and manageable delivery times. Tell us what you need and we will make a corresponding offer.
New Die spotting press ISGEC 50t - 500t, individually tailored to your needs with attractive conditions, excellent quality and manageable delivery times. Tell us what you need and we will make a corresponding offer.
Used vertical band saw BEHRINGER LPS 60 in excellent condition (little used). Working area 1,260mm x 720mm x 600mm. Smallest material height 10mm, smallest section width 5mm. Cutting speed: 20 - 200m / min.
Used two-hand control panel SIEMENS XY2 in almost mint condition. The control panel was only used for a short time on a mechanical press.
Second hand closed die forging hammer HUTA ZYGMUNT MPM 16.000B in partial overhauled condition with pneumatic food operation pedal, new GERB shock absorbers and new guiding. The hammer is still mounted on its foundation, wedges, screwing and ram are already dismantled. Very good overall condition.
sotec GmbH
Gewerbestr. 14
77694 Kehl
Germany
+49.(0)7851. 955 800
+49.(0)7851. 955 801
+49.(0)160. 975 202 02
info@sotec4u.com
www.sotec4u.com
© sotec GmbH